Specifications:
Thermostatic Steam Trap
New SCCV System
Adjustable Discharge Temp.
Hot Condensate Forming Water Seal & No Steam Loss
Stand Water Hammer
Design Pressure: PN63, PN100
Pressure: 1.0 – 6.5 Mpa
Material: Forged Steel A182 F11
Temperature: 425 ℃
Working Media: Steam, Condensate Water
End Connection: Flange, Screw & Socket Welded.

Thermostatic Steam Trap / Bimetallic Seam Trap

TCFH1 , TCFH2:

• Tight shut-off and long service life by using SCCV system. 
• Efficient in energy saving—adjustable discharging temperature And effectively using the sensible heat of hot condensate.
• Discharging temperature can be adjusted when the pipe net is in Operation. Can be installed in any direction.
• Hot condensate exists just before the trap, forming a tight water Seal, which ensures no steam loss.
• Withstands water hammer with outstanding performance of air Venting.
• Operating without noise, benefiting for environmental protection.
• Full open at the beginning of steam supplying, discharging cold condensate and air rapidly, which ensures quick start-up.
• Stainless steel internals are resistant to corrosion and cavitations. Small in size and light in weight, easy maintenance.

Application:

this bimetallic steam trap is suitable for steam main pipe, steam tracer and container insulation of high temperature and high pressure, saturated steam and over heated steam, etc…

Note:
Insulation is not recommended for the pipe section 1meter before the trap and the trap itself.